Jump to content

Gel electrophoresis of proteins

From Wikipedia, the free encyclopedia
Proteins separated by SDS-PAGE, Coomassie brilliant blue staining

Protein electrophoresis is a method for analysing the proteins in a fluid or an extract. The electrophoresis may be performed with a small volume of sample in a number of alternative ways with or without a supporting medium, namely agarose or polyacrylamide. Variants of gel electrophoresis include SDS-PAGE, free-flow electrophoresis, electrofocusing, isotachophoresis, affinity electrophoresis, immunoelectrophoresis, counterelectrophoresis, and capillary electrophoresis. Each variant has many subtypes with individual advantages and limitations. Gel electrophoresis is often performed in combination with electroblotting or immunoblotting to give additional information about a specific protein.[1]

Denaturing gel methods

[edit]

SDS-PAGE

[edit]

SDS-PAGE, sodium dodecyl sulfate polyacrylamide gel electrophoresis, describes a collection of related techniques to separate proteins according to their electrophoretic mobility (a function of the molecular weight of a polypeptide chain) while in the denatured (unfolded) state. In most proteins, the binding of SDS to the polypeptide chain imparts an even distribution of charge per unit mass, thereby resulting in a fractionation by approximate size during electrophoresis.[2]

SDS is a strong detergent agent used to denature native proteins to unfolded, individual polypeptides. When a protein mixture is heated to 100 °C in presence of SDS, the detergent wraps around the polypeptide backbone. In this process, the intrinsic charges of polypeptides becomes negligible when compared to the negative charges contributed by SDS. Thus polypeptides after treatment become rod-like structures possessing a uniform charge density, that is same net negative charge per unit length. The electrophoretic mobilities of these proteins will be a linear function of the logarithms of their molecular weights.[3]

Native gel methods

[edit]

Native gels, also known as non-denaturing gels, analyze proteins that are still in their folded state. Thus, the electrophoretic mobility depends not only on the charge-to-mass ratio, but also on the physical shape and size of the protein.[4]

Blue native PAGE

[edit]

BN-PAGE is a native PAGE technique, where the Coomassie brilliant blue dye provides the necessary charges to the protein complexes for the electrophoretic separation.[5][6] The disadvantage of Coomassie is that in binding to proteins it can act like a detergent causing complexes to dissociate. Another drawback is the potential quenching of chemoluminescence (e.g. in subsequent western blot detection or activity assays) or fluorescence of proteins with prosthetic groups (e.g. heme or chlorophyll) or labelled with fluorescent dyes.[citation needed]

Clear native PAGE

[edit]

CN-PAGE (commonly referred to as Native PAGE) separates acidic water-soluble and membrane proteins in a polyacrylamide gradient gel. It uses no charged dye so the electrophoretic mobility of proteins in CN-PAGE (in contrast to the charge shift technique BN-PAGE) is related to the intrinsic charge of the proteins.[7] The migration distance depends on the protein charge, its size and the pore size of the gel. In many cases this method has lower resolution than BN-PAGE, but CN-PAGE offers advantages whenever Coomassie dye would interfere with further analytical techniques, for example it has been described as a very efficient microscale separation technique for FRET analyses.[8] Additionally, as CN-PAGE does not require the harsh conditions of BN-PAGE, it can retain the supramolecular assemblies of membrane protein complexes that would be dissociated in BN-PAGE.[7]

Preparative native PAGE

[edit]

The folded protein complexes of interest separate cleanly and predictably without the risk of denaturation due to the specific properties of the polyacrylamide gel, electrophoresis buffer solution, electrophoretic equipment and standardized parameters used. The separated proteins are continuously eluted into a physiological eluent and transported to a fraction collector. In four to five PAGE fractions each the different metal cofactors can be identified and absolutely quantified by high-resolution ICP-MS. The associated structures of the isolated metalloproteins in these fractions can be specifically determined by solution NMR spectroscopy.[9]

Buffer systems

[edit]
Postulated migration of proteins in a Laemmli gel system A: Stacking gel, B: Resolving gel, o: sample application c: discontinuities in the buffer and electrophoretic matrix

Most protein separations are performed using a "discontinuous" (or DISC) buffer system that significantly enhances the sharpness of the bands within the gel. During electrophoresis in a discontinuous gel system, an ion gradient is formed in the early stage of electrophoresis that causes all of the proteins to focus into a single sharp band. The formation of the ion gradient is achieved by choosing a pH value at which the ions of the buffer are only moderately charged compared to the SDS-coated proteins. These conditions provide an environment in which Kohlrausch's reactions determine the molar conductivity. As a result, SDS-coated proteins are concentrated to several fold in a thin zone of the order of 19 μm within a few minutes. At this stage all proteins migrate at the same migration speed by isotachophoresis. This occurs in a region of the gel that has larger pores so that the gel matrix does not retard the migration during the focusing or "stacking" event.[10][11] Separation of the proteins by size is achieved in the lower, "resolving" region of the gel. The resolving gel typically has a much smaller pore size, which leads to a sieving effect that now determines the electrophoretic mobility of the proteins. At the same time, the separating part of the gel also has a pH value in which the buffer ions on average carry a greater charge, causing them to "outrun" the SDS-covered proteins and eliminate the ion gradient and thereby the stacking effect.[citation needed]

A very widespread discontinuous buffer system is the tris-glycine or "Laemmli" system that stacks at a pH of 6.8 and resolves at a pH of ~8.3-9.0. A drawback of this system is that these pH values may promote disulfide bond formation between cysteine residues in the proteins because the pKa of cysteine ranges from 8-9 and because reducing agent present in the loading buffer doesn't co-migrate with the proteins. Recent advances in buffering technology alleviate this problem by resolving the proteins at a pH well below the pKa of cysteine (e.g., bis-tris, pH 6.5) and include reducing agents (e.g. sodium bisulfite) that move into the gel ahead of the proteins to maintain a reducing environment. An additional benefit of using buffers with lower pH values is that the acrylamide gel is more stable at lower pH values, so the gels can be stored for long periods of time before use.[12][13]

SDS gradient gel electrophoresis of proteins

[edit]

As voltage is applied, the anions (and negatively charged sample molecules) migrate toward the positive electrode (anode) in the lower chamber, the leading ion is Cl ( high mobility and high concentration); glycinate is the trailing ion (low mobility and low concentration). SDS-protein particles do not migrate freely at the border between the Cl of the gel buffer and the Gly of the cathode buffer. Friedrich Kohlrausch found that Ohm's law also applies to dissolved electrolytes. Because of the voltage drop between the Cl and Glycine-buffers, proteins are compressed (stacked) into micrometer thin layers.[14] The boundary moves through a pore gradient and the protein stack gradually disperses due to a frictional resistance increase of the gel matrix. Stacking and unstacking occurs continuously in the gradient gel, for every protein at a different position. For a complete protein unstacking the polyacrylamide-gel concentration must exceed 16% T. The two-gel system of "Laemmli" is a simple gradient gel. The pH discontinuity of the buffers is of no significance for the separation quality, and a "stacking-gel" with a different pH is not needed.[15]

Visualization

[edit]

The most popular protein stain is Coomassie brilliant blue. It is an anionic dye, which non-specifically binds to proteins. Proteins in the gel are fixed by acetic acid and simultaneously stained. The excess dye incorporated into the gel can be removed by destaining with the same solution without the dye. The proteins are detected as blue bands on a clear background.[16][17]

When more sensitive method than staining by Coomassie is needed, silver staining is usually used. Silver staining is a sensitive procedure to detect trace amounts of proteins in gels, but can also visualize nucleic acid or polysaccharides.[17]

Visualization methods without using a dye such as Coomassie and silver are available on the market.[18] For example Bio-Rad Laboratories markets ”stain-free” gels for SDS-PAGE gel electrophoresis. Alternatively, reversible fluorescent dyes, such as those from Azure Biosystems such as AzureRed or Azure TotalStain Q can be used.[17][18][19]

Similarly as in nucleic acid gel electrophoresis, tracking dye is often used. Anionic dyes of a known electrophoretic mobility are usually included in the sample buffer. A very common tracking dye is Bromophenol blue. This dye is coloured at alkali and neutral pH and is a small negatively charged molecule that moves towards the anode. Being a highly mobile molecule it moves ahead of most proteins.[20]

Medical applications

[edit]
Schematic representation of a protein electrophoresis gel.
Serum protein electrophoresis showing a paraprotein (peak in the gamma zone) in a patient with multiple myeloma.

In medicine, protein electrophoresis is a method of analysing the proteins mainly in blood serum. Before the widespread use of gel electrophoresis, protein electrophoresis was performed as free-flow electrophoresis (on paper) or as immunoelectrophoresis.[citation needed]

Traditionally, two classes of blood proteins are considered: serum albumin and globulin. They are generally equal in proportion, but albumin as a molecule is much smaller and lightly, negatively-charged, leading to an accumulation of albumin on the electrophoretic gel. A small band before albumin represents transthyretin (also named prealbumin). Some forms of medication or body chemicals can cause their own band, but it usually is small. Abnormal bands (spikes) are seen in monoclonal gammopathy of undetermined significance and multiple myeloma, and are useful in the diagnosis of these conditions.[citation needed]

The globulins are classified by their banding pattern (with their main representatives):[citation needed]

See also

[edit]

References

[edit]
  1. ^ Michov, Budin (2022). Electrophoresis Fundamentals: Essential Theory and Practice. De Gruyter. p. 490. doi:10.1515/9783110761641. ISBN 9783110761641. S2CID 247987700.
  2. ^ Stringer, R. (2005). "Electrophoresis". Encyclopedia of Analytical Science (2nd ed.). Royal Liverpool University Hospital. p. 360. doi:10.1016/B0-12-369397-7/00120-5. ISBN 978-0-12-369397-6.
  3. ^ Meredith, S C (1984). "The determination of molecular weight of proteins by gel permeation chromatography in organic solvents". Journal of Biological Chemistry. 259 (19): 11682–11685. doi:10.1016/s0021-9258(20)71263-9. ISSN 0021-9258. PMID 6480578.
  4. ^ Eubel, Holger; Braun, Hans-Peter; Millar, AHarvey (2005). "Blue-native PAGE in plants: a tool in analysis of protein-protein interactions". Plant Methods. 1 (1): 11. doi:10.1186/1746-4811-1-11. ISSN 1746-4811. PMC 1308860. PMID 16287510.
  5. ^ Schägger, Hermann; von Jagow, Gebhard (1991). "Blue native electrophoresis for isolation of membrane protein complexes in enzymatically active form". Analytical Biochemistry. 199 (2): 223–231. doi:10.1016/0003-2697(91)90094-A. PMID 1812789.
  6. ^ Wittig, Ilka; Braun, Hans-Peter; Schägger, Hermann (2006). "Blue native PAGE". Nat. Protoc. 1 (1): 418–428. doi:10.1038/nprot.2006.62. PMID 17406264. S2CID 19715017.
  7. ^ a b Wittig, IIlka; Schägger, Hermann (2005-10-11). "Advantages and limitations of clear-native PAGE". Proteomics. 5 (17): 4338–4346. doi:10.1002/pmic.200500081. PMID 16220535. S2CID 23396231.
  8. ^ Gavin, Paul D.; Devenish, Rodney J.; Prescott, Mark (2003). "FRET reveals changes in the F1–stator stalk interaction during activity of F1F0-ATP synthase". Biochim Biophys Acta. 1607 (2–3): 167–79. doi:10.1016/j.bbabio.2003.09.013. PMID 14670607.
  9. ^ Kastenholz, Bernd (2004). "Preparative Native Continuous Polyacrylamide Gel Electrophoresis (PNC-PAGE): An Efficient Method for Isolating Cadmium Cofactors in Biological Systems". Analytical Letters. 37 (4): 657–665. doi:10.1081/AL-120029742. ISSN 0003-2719. S2CID 97636537.
  10. ^ Ornstein, Leonard (December 1964). "Disc Electrophoresis. I. Background and Theory". Annals of the New York Academy of Sciences. 121 (2): 321–349. Bibcode:1964NYASA.121..321O. CiteSeerX 10.1.1.140.7598. doi:10.1111/j.1749-6632.1964.tb14207.x. PMID 14240533. S2CID 28591995.
  11. ^ Davis, Baruch J. (December 1964). "Disc Electrophoresis. 2, Method and application to human serum proteins". Annals of the New York Academy of Sciences. 121 (2): 404–427. Bibcode:1964NYASA.121..404D. doi:10.1111/j.1749-6632.1964.tb14213.x. PMID 14240539. S2CID 30512118.
  12. ^ Schägger, Hermann; von Jagow, Gebhard (1987-11-01). "Tricine-sodium dodecyl sulfate-polyacrylamide gel electrophoresis for the separation of proteins in the range from 1 to 100 kDa". Analytical Biochemistry. 166 (2): 368–379. doi:10.1016/0003-2697(87)90587-2. ISSN 0003-2697. PMID 2449095.
  13. ^ Wiltfang, Jens; Arold, Norbert; Neuhoff, Volker (1991). "A new multiphasic buffer system for sodium dodecyl sulfate-polyacrylamide gel electrophoresis of proteins and peptides with molecular masses 100 000–1000, and their detection with picomolar sensitivity". Electrophoresis. 12 (5): 352–366. doi:10.1002/elps.1150120507. ISSN 0173-0835. PMID 1718736. S2CID 40101706.
  14. ^ Kohlrausch, Friedr (1897). "Ueber Concentrations-Verschiebungen durch Electrolyse im Inneren von Lösungen und Lösungsgemischen". Annalen der Physik und Chemie. 62 (10): 209–239. Bibcode:1897AnP...298..209K. doi:10.1002/andp.18972981002.
  15. ^ Westermeier, Reiner (2016-05-02). Electrophoresis in Practice: Guide to Methods and Applications of DNA and Protein Separations, A (5th ed.). Wiley. p. 43. doi:10.1002/9783527695188. ISBN 978-3-527-69518-8.
  16. ^ Westermeier, Reiner (2016-02-26). Electrophoresis in Practice: A Guide to Methods and Applications of DNA and Protein Separations (5th ed.). Wiley. doi:10.1002/9783527695188. ISBN 978-3-527-69518-8.
  17. ^ a b c Sasse, Joachim; Gallagher, Sean R. (2009). "Staining Proteins in Gels". Current Protocols in Molecular Biology. 85 (1): Unit 10.6. doi:10.1002/0471142727.mb1006s85. ISSN 1934-3639. PMID 19170026. S2CID 205153300.
  18. ^ a b Singer, Victoria L.; Haugland, Richard P. (1999). "Fluorescent Imaging of Nucleic Acids and Proteins in Gels". Fluorescent and Luminescent Probes for Biological Activity (2nd ed.). Academic Press. pp. 58–61. doi:10.1016/b978-012447836-7/50006-3. ISBN 978-0-12-447836-7.
  19. ^ "In-gel Fluorescence". Azure Biosystems. Retrieved 2023-12-02.
  20. ^ Westermeier, Reiner (2016-05-02). Electrophoresis in Practice: Guide to Methods and Applications of DNA and Protein Separations, A (5th ed.). Wiley. pp. 2, 12, 121. doi:10.1002/9783527695188. ISBN 978-3-527-69518-8.
[edit]