Jump to content

Richardson extrapolation

From Wikipedia, the free encyclopedia
An example of Richardson extrapolation method in two dimensions.

In numerical analysis, Richardson extrapolation is a sequence acceleration method used to improve the rate of convergence of a sequence of estimates of some value . In essence, given the value of for several values of , we can estimate by extrapolating the estimates to . It is named after Lewis Fry Richardson, who introduced the technique in the early 20th century,[1][2] though the idea was already known to Christiaan Huygens in his calculation of .[3] In the words of Birkhoff and Rota, "its usefulness for practical computations can hardly be overestimated."[4]

Practical applications of Richardson extrapolation include Romberg integration, which applies Richardson extrapolation to the trapezoid rule, and the Bulirsch–Stoer algorithm for solving ordinary differential equations.

General formula

[edit]

Notation

[edit]

Let be an approximation of (exact value) that depends on a step size h (where ) with an error formula of the form where the are unknown constants and the are known constants such that . Furthermore, represents the truncation error of the approximation such that Similarly, in the approximation is said to be an approximation.

Note that by simplifying with Big O notation, the following formulae are equivalent:

Purpose

[edit]

Richardson extrapolation is a process that finds a better approximation of by changing the error formula from to Therefore, by replacing with the truncation error has reduced from to for the same step size . The general pattern occurs in which is a more accurate estimate than when . By this process, we have achieved a better approximation of by subtracting the largest term in the error which was . This process can be repeated to remove more error terms to get even better approximations.

Process

[edit]

Using the step sizes and for some constant , the two formulas for are:

(1)
(2)

To improve our approximation from to by removing the first error term, we multiply equation 2 by and subtract equation 1 to give us This multiplication and subtraction was performed because is an approximation of . We can solve our current formula for to give which can be written as by setting

Recurrence relation

[edit]

A general recurrence relation can be defined for the approximations by where satisfies

Properties

[edit]

The Richardson extrapolation can be considered as a linear sequence transformation.

Additionally, the general formula can be used to estimate (leading order step size behavior of Truncation error) when neither its value nor is known a priori. Such a technique can be useful for quantifying an unknown rate of convergence. Given approximations of from three distinct step sizes , , and , the exact relationshipyields an approximate relationship (please note that the notation here may cause a bit of confusion, the two O appearing in the equation above only indicates the leading order step size behavior but their explicit forms are different and hence cancelling out of the two O terms is only approximately valid) which can be solved numerically to estimate for some arbitrary valid choices of , , and .

As , if and is chosen so that , this approximate relation reduces to a quadratic equation in , which is readily solved for in terms of and .

Example of Richardson extrapolation

[edit]

Suppose that we wish to approximate , and we have a method that depends on a small parameter in such a way that

Let us define a new functionwhere and are two distinct step sizes.

Then is called the Richardson extrapolation of A(h), and has a higher-order error estimate compared to .

Very often, it is much easier to obtain a given precision by using R(h) rather than A(h′) with a much smaller h′. Where A(h′) can cause problems due to limited precision (rounding errors) and/or due to the increasing number of calculations needed (see examples below).

Example pseudocode for Richardson extrapolation

[edit]

The following pseudocode in MATLAB style demonstrates Richardson extrapolation to help solve the ODE , with the Trapezoidal method. In this example we halve the step size each iteration and so in the discussion above we'd have that . The error of the Trapezoidal method can be expressed in terms of odd powers so that the error over multiple steps can be expressed in even powers; this leads us to raise to the second power and to take powers of in the pseudocode. We want to find the value of , which has the exact solution of since the exact solution of the ODE is . This pseudocode assumes that a function called Trapezoidal(f, tStart, tEnd, h, y0) exists which attempts to compute y(tEnd) by performing the trapezoidal method on the function f, with starting point y0 and tStart and step size h.

Note that starting with too small an initial step size can potentially introduce error into the final solution. Although there are methods designed to help pick the best initial step size, one option is to start with a large step size and then to allow the Richardson extrapolation to reduce the step size each iteration until the error reaches the desired tolerance.

tStart = 0          % Starting time
tEnd = 5            % Ending time
f = -y^2            % The derivative of y, so y' = f(t, y(t)) = -y^2
                    % The solution to this ODE is y = 1/(1 + t)
y0 = 1              % The initial position (i.e. y0 = y(tStart) = y(0) = 1)
tolerance = 10^-11  % 10 digit accuracy is desired

% Don't allow the iteration to continue indefinitely
maxRows = 20
% Pick an initial step size
initialH = tStart - tEnd
% Were we able to find the solution to within the desired tolerance? not yet.
haveWeFoundSolution = false

h = initialH

% Create a 2D matrix of size maxRows by maxRows to hold the Richardson extrapolates
% Note that this will be a lower triangular matrix and that at most two rows are actually
% needed at any time in the computation.
A = zeroMatrix(maxRows, maxRows)

% Compute the top left element of the matrix.
% The first row of this (lower triangular) matrix has now been filled.
A(1, 1) = Trapezoidal(f, tStart, tEnd, h, y0)

% Each row of the matrix requires one call to Trapezoidal
% This loops starts by filling the second row of the matrix,
% since the first row was computed above
for i = 1 : maxRows - 1 % Starting at i = 1, iterate at most maxRows - 1 times
    % Halve the previous value of h since this is the start of a new row.
    h = h/2

    % Starting filling row i+1 from the left by calling
    % the Trapezoidal function with this new smaller step size
    A(i + 1, 1) = Trapezoidal(f, tStart, tEnd, h, y0)

    % Go across this current (i+1)-th row until the diagonal is reached
    for j = 1 : i
        % To compute A(i + 1, j + 1), which is the next Richardson extrapolate, 
        % use the most recently computed value (i.e. A(i + 1, j))
        % and the value from the row above it (i.e. A(i, j)).

        A(i + 1, j + 1) = ((4^j).*A(i + 1, j) - A(i, j))/(4^j - 1);
    end
    
    % After leaving the above inner loop, the diagonal element of row i + 1 has been computed
    % This diagonal element is the latest Richardson extrapolate to be computed.
    % The difference between this extrapolate and the last extrapolate of row i is a good
    % indication of the error.
    if (absoluteValue(A(i + 1, i + 1) - A(i, i)) < tolerance)  % If the result is within tolerance
        % Display the result of the Richardson extrapolation
        print("y = ", A(i + 1, i + 1))
        haveWeFoundSolution = true
        % Done, so leave the loop
        break
    end
end

% If we were not able to find a solution to within the desired tolerance
if (not haveWeFoundSolution)
    print("Warning: Not able to find solution to within the desired tolerance of ", tolerance);
    print("The last computed extrapolate was ", A(maxRows, maxRows))
end

See also

[edit]

References

[edit]
  1. ^ Richardson, L. F. (1911). "The approximate arithmetical solution by finite differences of physical problems including differential equations, with an application to the stresses in a masonry dam". Philosophical Transactions of the Royal Society A. 210 (459–470): 307–357. doi:10.1098/rsta.1911.0009.
  2. ^ Richardson, L. F.; Gaunt, J. A. (1927). "The deferred approach to the limit". Philosophical Transactions of the Royal Society A. 226 (636–646): 299–349. doi:10.1098/rsta.1927.0008.
  3. ^ Brezinski, Claude (2009-11-01), "Some pioneers of extrapolation methods", The Birth of Numerical Analysis, WORLD SCIENTIFIC, pp. 1–22, doi:10.1142/9789812836267_0001, ISBN 978-981-283-625-0
  4. ^ Page 126 of Birkhoff, Garrett; Gian-Carlo Rota (1978). Ordinary differential equations (3rd ed.). John Wiley and sons. ISBN 0-471-07411-X. OCLC 4379402.
  • Extrapolation Methods. Theory and Practice by C. Brezinski and M. Redivo Zaglia, North-Holland, 1991.
  • Ivan Dimov, Zahari Zlatev, Istvan Farago, Agnes Havasi: Richardson Extrapolation: Practical Aspects and Applications, Walter de Gruyter GmbH & Co KG, ISBN 9783110533002 (2017).
[edit]